AMP 1000 automatic bollards are designed to provide entry protection to driveways, car parking spaces and other low traffic volume locations with up to 500 bollard movements per day. They are a stylish and economical fully automatic bollard, available in either 115mm or 200mm diameter with powder coated mild steel or optional brushed stainless steel construction.
A typical installation of two AMP 1000 bollards
AMP 1000 bollards are electrically operated, and incorporate a soft start and stop mechanism to reduce noise and wear on the mechanism. The optional CDK control unit can operate up to 4 bollards together, and plug in loop detectors may be specified to provide a full safety system.
A remote control receiver is also available to allow bollard operation using remote control keyfob style transmitters.
Available Models
|
Product Code |
Model |
| CT-A115AM-P | 115mm dia. x 500mm high mild steel automatic bollard in grey RAL7022 |
| CT-A115AS-S | 115mm dia. x 500mm high stainless steel automatic bollard with brushed finish |
| CT-Al27AM-P | 200mm dia. x 700mm high mild steel automatic bollard in grey RAL7022 |
| CT-Al27AS-S | 200mm dia. x 700mm high stainless steel automatic bollard with brushed finish |
Standard Specification AMP 1000 Automatic Bollard
| Construction | Mild Steel casing and bollard (304 grade stainless steel version is available) |
| Finish | Polyester powder coated grey RAL 7022 (Stainless steel version has brushed finish). |
| Dimensions | AMP1000/115: 115mm diameter by 500mm height above ground. Casing extends 965mm into the ground.AMP 1000/200: 200mm diameter by 700mm height above ground. Casing extends 1180mm into the ground. |
| Control Unit | Type CDK-ES required Supplied with IP 67 rated plastic enclosure for mounting inside a building or external cabinet. |
| No. of Daily Cycles | Up to 500 cycles per day. |
| Raising time | 7 seconds from fully retracted to fully raised. Operates with soft start and stop |
| IP rating | IP 67 |
| Working Temperature Range | -20°C to +60°C |
| Hazard Warnings | Reflective strip around upper section. Optional LED lighting ring to AMP 1000/200 model. |
| Optional Items | |
| Control Unit | Type CDK ES with plastic enclosure |
| Remote Control Receiver | P.0 B to plug into the control board |
| Remote Control Transmitter | 2 Channel key-tob style, (available in packs of 5). |
| Safety Loop detector | Dual Channel plug in detector type |
datasheet-amp1000